VLTOR M1-S M14 M1A IMPROVED MOD STOCK SYSTEM MODSTOCK M1S TAN/FDE SOCOM SEMI AUTO

VLTOR M1-S M14 M1A IMPROVED MOD STOCK SYSTEM MODSTOCK M1S TAN/FDE SOCOM SEMI AUTO

While our original M14/M1A Stock System has been the essential upgrade to the Springfield SOCOM platform, we saw huge areas of improvement. The stock system is now formed with VLTOR’s proprietary mold and is manufactured with a proprietary carbon fiber composite. This makes the stock system stronger and lighter than ever before. The stock is adjustable for five lengths of pull and adjusts for elevation. In its lowest position the stock will allow for the use of iron sights or the stock can be raised up to 1.25? higher for use with mounted optics. This stock system features an improved magwell relief that allows for easier operation of any M14/M1A magazine. The buttstock is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch, making transitions from the ready position feel more natural.

The VLTOR Improved Modstock chassis is made to military specifications. There is a large amount of variation in the commercial SAI receivers, including variation in the height of the rear heel in the receivers. It is possible that you may experience a minor heel gap with your commercial receiver. For additional information please email [email protected]

The M1-S Stock system comes included with: carbon fiber composite fore end, pistol grip assembly, buttstock adapter, and VLTOR EMOD buttstock.

• Lightweight
• Drop-in installation
• Proprietary mold and carbon fiber composite specific to VLTOR
• Stock adjusts for 1.25? in elevation
• Comes in a choice of four colors: Black, FDE/Tan, Foliage Green, or Raw
• Waterproof side battery compartments that holds (4) CR123 or (3) AA batteries in each compartment
• Weatherproof compartment in the clubfoot area of the stock that hold two AA  batteries
• Comes pre-assembled with carbon fiber composite forend, pistol grip, stock adapter and VLTOR EMOD buttstock
• Buttstock is impact and temperature resistant polymer, specifically blended for VLTOR stocks
• Matte (anti-reflection/anti-glare) finish
• Has standard military and quick disconnect swivel socket accessible from both sides

*The VLTOR CASV-14 handguard system and Vltor ModPod bipod set are sold separately*

SPECS:

Weight of stock system: 3lbs 0oz

LOP fully collapsed: 11.50 inches

LOP fully extended: 14.75 inches

Buttpad angle: -5 degrees with decrease to -15 at toe