Superlative Arms Adjustable Gas Block Bleed Off Stainless Matte Finish, Set Screw, Low Profile Steel

Superlative Arms Adjustable Gas Block Bleed Off 

CHOOSE  .625 .750 .875 .936 Low Profile Stainless Matte Finish 

The Superlative Arms patent pending “Bleed Off”, direct impingement, gas block for the AR platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks. 

• The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler.
• Reduction of felt recoil.
• Patent pending adjustment detent is located outside of the block and therefore no contamination.
• The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw / no loss of detent due to carbon build up.  Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out.
• When using SBR’s and / or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back.

Specifications:

Gas Block Material: 416 SS
Finish: Melonite or Matt Stainless (CHOOSE)
Barrel Diameter:0.625". .750" 0.875"- 0.936" (CHOOSE)
Weight: 1.68 oz
Length: 1.00"
Attachment Type: Solid or Clamp On (CHOOSE)

Gas Adjustment:  (Patent ) 30 Locked Positions, Front Of Block
Bleed Off Port:  (Patent ) Front Of Block
Included:

Gas Block - Assembled
(2) 10-32 x 3/16" Socket Head Cap Screws
(1) Gas Tube Roll Pins
(1) 3/32 X 6" L-Shaped Hex Keys