Strike Industries SI G4 SlideComp Glock Compensator
Strike Industries presents the industry’s first slide mounted compensator for Glock Gen4 pistols, with the SI G4 SlideComp. By mounting the compensator to the slide, the SI-G4-SCOMP requires no permanent modification to the host platform, and eliminates the need for a threaded barrel. The profile of the compensator aligns with the slide for holster compatibility, while the internal geometry and ports work to reduce muzzle rise and perceived recoil. For one handed manipulations, the compensator can be used to push-rack the slide against hard surfaces, to clear malfunctions or lock the slide back for a reload. Combine with the Glock GUM for an ultimate gunsmith-free“go-fast” Glock that can still be reverted to stock configuration. ( Weight : 3.7 oz. )
- Compatible with fourth generation G17 and G19 only. Not compatible with Gen 1-3 or Gen 5 Glocks.
Warning: Improper installation or alignment of the compensator with the handgun will result in damage to the firearm. Please call Product Support if the user notices improper alignment or is unsure of installation procedures.
- 1x G4 SlideComp
- 4x M5 Installation set screws (side)
- 2x M4 installation set screws (bottom)
- 1x 2mm Allen wrench
- 1x OEM Glock Gen 3 full size or compact guide rod assembly
- Eliminates the need for threaded barrels
- Blended, no snag profile
- Precision CNC machined
- No permanent modification of weapon required
- Compatible with fourth generation G17 and G19 only
- Compatible with open-bottomed holsters
- Can be used in conjunction with threaded barrels
Note: Minor hand-fitment of the compensator may be required. Please contact [email protected] if the compensator exhibits slight or aggressive misalignment when mounted. Alignment rod bushing should sit completely flush at the rear of the slide's RSA passthrough.
Note: Application of threadlocker (Loctite or Rocksett) to the set screws before installation is highly recommended. Not compatible with Gen 1-3 Glocks due to differences in slide dimensions and design. Gen 3 slides cannot be modified to accommodate our G4 Slide Comps. Aftermarket recoil spring assemblies can be used as long as they are Gen 3 versions and correspond to the firearm's model number. (Ex. Gen 3 G17 recoil spring assembly with G17 handgun, or Gen 3 G19 recoil spring assembly in G19 handgun).
Note: Normal fouling on the face of the slide due to the G4 Slide Compensator’s effects is to be expected.
Note: Improperly securing the compensator may cause damage to the slide. When installing, ensure the compensator flush and fitted firmly against the slide.
How to choose the right guide rod for your firearm.
1) Standard Guide Rod - CHOOSE 17
2) Compact Guide Rod - CHOOSE 19
*Total Installed Weight : 3.7 oz.