Radian Raptor Ambidextrous Charging Handle 7.62 .308 AR10 SR25 AXTS
AXTS has changed names and is now Radian Weapon Systems. Description: The Raptor™ is truly revolutionary in design & function. From rapid palm “blading” or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Designed and manufactured by AXTS Weapons Systems in Salem, Oregon. Machined from aircraft grade 7075 aluminum and MIL-SPEC Type III Hard Anodized. Available in 7.62 AR10 (select below).
FAQ:
Will the 7.62 model work in the S&W MP10?
Yes, with a slight modification to prevent binding. The Raptor does drop right into the upper of the S&W - and cycles smoothly. However, with the bolt/bolt carrier installed, it will bind up. The hole in the front of the Raptor is a smaller diameter than the stock S&W unit and there is a small "step" in the Raptor right near the front end where the larger trough transitions to the smaller diameter hole. This is where the problem lies. There is no step in the trough in the S&W stock charging handle. To mod it so it works, take a small file (chain saw file works) and make the front of the Raptor equal the trough, i.e. remove the step (see pic). Dremel to polish it, put aluminum black on if desired and PRESTO have a working Raptor in an S&W M&P10.
Fits:
DPMS LR-308
Bushmaster O.R.C./LR-308
KAC SR25, MK11, M110
LaRue OBR
Noveske N6 308
POF-USA 308
Armalite AR-10
LMT 308MWS
Ruger SR-762
Palmetto Armory PA-10
Aero Precision M5
Lancer L7
Does NOT Fit:
Rock River Arms LAR-8
Bushmaster BAR-10
SIG 716
Smith & Wesson MP-10 (WILL FIT WITH MODIFICATION MENTIONED ABOVE)
Colt LE901
H&K 417/MR762
DPMS R-25 GEN II
BPM (Barnes Precision Machine) Long Range Marksman .308
Select a row below to filter reviews.
5.0