Radian 7.62 Raptor-SD Ambidextrous Charging Handle .308 AXTS Freedom Bone
Utilizing the same ambidextrous design as the original Raptor Charging Handle, the Raptor Freedom Bone (RAPT-762-F-BONE-BLK) aka Raptor-SD is optimized for use with suppressed weapons. The patent-pending ported shaft redirects gas and minimizes blowback from the upper receiver, resulting in a much more comfortable shooting experience via a gas buster method.
The silencer-optimized Raptor-SD™ features a ported shaft designed to redirect gasses down and forward, away from the shooter’s face when shooting suppressed. Its ambidextrous design allows rapid palm "blading" or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. The Raptor-SD is compatible with most AR10-pattern rifles. • Designed & Manufactured in the USA • Machined from 7075-T6 aluminum • Milspec Type 3 Hard Coat Anodized Finish w/ Cerakote Color Options: FDE, OD Green, Tungsten Grey, Radian Grey (matches Magpul), Brown
7.62mm Raptor Charging Handle is NOT compatible with:
DPMS G2 or (Gen 2)
S&W M&P10s (without modification)
Heckler & Koch MR762
Rock River LAR-8
Daniel Defense DD5V1
Windham Weaponry .308 SRC
Will the 7.62 model work in the S&W MP10?
Yes, with a slight modification to prevent binding. The Raptor does drop right into the upper of the S&W - and cycles smoothly. However, with the bolt/bolt carrier installed, it will bind up.
The hole in the front of the Raptor is a smaller diameter than the stock S&W unit and there is a small "step" in the Raptor right near the front end where the larger trough transitions to the smaller diameter hole. This is where the problem lies.
There is no step in the trough in the S&W stock charging handle.
To mod it so it works, take a small file (chain saw file works) and make the front of the Raptor equal the trough, i.e. remove the step (see pic). Dremel to polish it, put aluminum black on if desired and PRESTO have a working Raptor in an S&W M&P10.
KAC SR25, MK11, M110
Noveske N6 308
Palmetto Armory PA-10
Aero Precision M5
Does NOT Fit:
Rock River Arms LAR-8
Smith & Wesson MP-10 (WILL FIT WITH MODIFICATION MENTIONED ABOVE)
DPMS R-25 GEN II
BPM (Barnes Precision Machine) Long Range Marksman .308