Grey Ghost Precision V1 For Glock 19 Gen1-3 Stripped Slide 9mm RMR Cut GGP

Voodoo VDI by Adams Arms for Glock parts are designed as an improved drop-in fit for the Glock. Performance Guide Rods are machined and polished from 17-4PH Stainless Steel and Finished in Voodoo Innovations LifeCoat process.

VooDoo Innovations (VDI) has trademarked the term LifeCoat. VDI has taken their years of experience in the world of Mechanics, Engineering and Firearms’ Technology to apply these processes to their best intended application. Having the ability to offer specific materials, machining techniques, coatings and apply them to the purpose of the part is what allows them to offer Life-Time Warranties on the parts produced.
 
The Performance Guide Rod is Media Blasted on an automated, custom built blaster using a proprietary blend of media. This allows VDI to control the consistency of each part while maintaining redundancy in production. It’s critical to the adhesion of these advanced coating processes to have a consistent surface finish prior to application. The 1st stage of coating is to deposit a layer of pure Nickel on all surfaces. This gives superior Lubricity and Corrosion Resistance. The shortfall of Nickel and/or Nickel Boron is wear on part-to-part contact surfaces where intense friction takes place. To overcome this shortfall and retain the integral properties of the Nickel, VDI permeates a 2nd layer of coating. This is a PVD type Melonite application that adds superior outside wear resistance during surface-to-surface contact and adds a Dark Grey/Black Pigment. The collaboration of these 2 coating processes, along with the superior surface preparation unites in sequence to offer superior lubricity, corrosion resistance, surface hardness and texture for the optimal functional performance of this part.

SPECIFICATIONS

Drop In Replacement
LifeCoat Performance Guide Rod
Nickel & PVD
Compatible with All Gen Glock Models: 1, 2, 3, 4 (Gen 4 Requires an Adapter Bushing)
Lifetime Warranty
Made in the U.S.A.

If added, the VDI Kit Includes:

3 Performance Guide Rods
3 Recoil Springs (So you may tailor the gun to your shooting - Standard spring, 5% Stronger spring for +P ammunition, 5% Lighter spring for Subsonic ammunition)

2) Voodoo Innovations VDI Threaded Melonite Nitride with PVD aka Lifecoat Barrel Available for Glock 19

For Glock 19 FGAV-47000

The VooVoo Innovations for Glock 19 9mm Match Grade Barrels are designed as an improved drop-in fit barrel for the Glock 19.  The VDI Barrel is machined to tighter fitment tolerances to increase accuracy potential without the need of gunsmith fitting. The barrel features a SAAMI spec 9mm Match chambering, Match Grade Rifling to allow the use of any 9mm projectile (not just jacketed bullets), threaded ½ x 28 TPI  for use with 9mm suppressors and compensators, machined from 416R stainless steel, and Finished in Voodoo Innovations LifeCoat process. Includes VDI Thread Protector.

FEATURES

9mm Match Grade Drop-in Barrel

SAAMI Spec 9mm Match Chambering
Tighter Tolerances for Accuracy
Match Grade Rifling
Allows for use of any 9mm projectile, not just jacketed bullets
LifeCoat Finish
Melonite & PVD
Threaded with Protector
½ x 28 TPI for Compensators and Suppressors
Made in the USA
Life-Time Warranty

SPECIFICATIONS

    416R Stainless Steel
    1:16 Twist
    Chambered 9x19mm
    Compatible with Glock 19
    Weight:
        Without Thread Protector: 3.7 oz
        With Thread Protector: 4.2 oz

FAQ

What is Lifecoat?

MELONITE NITRIDE (ADAMS ARMS PROPRIETARY "LIFECOAT" FALLS UNDER THIS CATEGORY BUT IS MORE ADVANCED MULTI-STEP PROCESS USING PVD INSTEAD OF LIQUID NITRIDE)

This finishing process provides a surface hardening condition that protects against corrosion and wear better than hard chrome or nickel plating. While liquid nitriding is a surface modification technology, Physical Vapor Deposition (PVD) coating involves the deposition of thin (2-10 microns; 0.0001”–0.0004”) proprietary films (i.e. TiN, CrN, Ti(C,N)) on the surface of components.

VooDoo Innovations (VDI) has trademarked the term LifeCoat. The term is used to describe a multitude of coating processes that best fit the application of the specific AR15 part. Since each part serves a different purpose, it has different applicable needs for surface protection, lubricity, hardness and color. Some coatings are “Line of Sight” coatings and can only coat outside dimensions of a part. While other coatings are baths and therefore have the ability to coat blind holes as well as other internal cavities. All coating processes have an intended purpose. Some coating processes offer superior lubricity, but may not be hard enough to hold up over long periods of time on point-to-point contact surfaces. VDI has taken their years of experience in the world of Mechanics, Engineering and Firearms’ Technology to apply these processes to their best intended application. Having the ability to offer specific materials, machining techniques, coatings and apply them to the purpose of the part is what allows them to offer Life-Time Warranties on the parts produced. Many variables come into play when applying various coatings; from heat and surface preparation to friction on mating contact points.