Eotech EXPS EXPS2-0 (Single dot) EXPS2-2 (Two dot - Choose reticle pattern) Holographic Sight Red Dot QD Lever
Length: 3.8 in (96.5mm)Width: 2.3 in (58.4mm)Height: 2.9 in (73.7mm)Weight: 11.2 oz (317.5g)Mount: 1" Weaver or Mil-Std 1913 railPower Source: 3 volts, (1) 123 Lithium batteryBrightness: 20 settingsWater Resistance: 10 ft (3m)Battery life: Approx 600 hours at nominal setting 12 at room temperatureColor/Finish: BlackNight vision compatible: NoReticle option(s): • -0: 68 MOA ring with 1 MOA dot (EXPS2-0)• -2: 68 MOA ring with (2) 1 MOA dots (EXPS2-2) EOTech Holographic Weapon Sight General Specifications Operation Optics: HolographyMagnification: 1XEye Relief: UnlimitedSealing: Interally fog-resistant opticsAdjustment Range (per click): Approx 0.5 MOA (1/2" at 100 yds) when zeroingAdjustment Range: +/-40 MOA travel Heads-Up-Display Window Optical Surfaces: Anti-reflective coating on external surfacesWindow Dimensions: 1.20" x 0.85" (30 x 23 mm)Front Window Material: 1/8" solid glassRear Window Material: 3/16" thick laminateField of View (100 yds): 30 yds (28 m) at a 3" eye relief Electrical Brightness Settings: 20 daylight settings 10 additional settings on night vision-compatible models Scrolling feature Adjustable for visibility in the brightest sunlight Compatible with Gen I through III night vision devicesAuto Battery Check Indicator: Reticle flashes on startup when battery is lowAuto Shutdown: User-controlled; shuts down at 4 or 8 hours Disclaimers: • EOTech reserves the right to change the product specifications at any time. • All EOTech material is for information purposes only and does not constitute any binding obligation or agreement by EOTech; and all claims about performance and performance characteristics assume normal, responsible usage within the warranty period. • EOTech users will often experience a point of impact shift away from the point of aim when the sight is used at a temperature different from the temperature at which the sight was zeroed. The point of aim shift may be greater the more extreme the temperature change. To achieve optimum accuracy, the sight should be re-zeroed whenever the temperature changes from the temperature at which the sight was zeroed. • All EOTech sights exhibit a varying degree of parallax depending on operating conditions.