Adams Arms 5.56 16" Carbine Lite Contour .625 1:7 Voodoo Barrel
- 16" EVO Ultra Lite 5.56 Barrel
- M4 Feed Ramps
- Only 1 lbs 7.2 oz
- .625 Carbine Gas System
- 1:7 Twist QPQ Melonite
- Barrel is 4150 CrMo
Best "Bang for the Buck" choice in barrels on the market today! Adams Arms has expanded its product line to now include a line of barrels. These barrels have proven to OUTPERFORM any mil-spec barrel on the market and come with a LIFETIME WARRANTY.
Current Barrels Disadvantages:
Standard chrome lined barrels are rifled with a slightly larger diameter than what is needed. This is done so the hard chrome can be added on top of the surface area which will add to the tolerances. It leaves high and low spots along with microscopic divots and deficits. These imperfections add resistance to the round as it travels down the barrel, slowing down the velocity. Accuracy and range of efficiency drops when the velocities on the round drop. This is evident even more so with the shorter barrels. The trade off is hard chrome resists corrosion better than the bare material the barrel is cut from and it does not have a high cost associated with it. While eventually over time it will wear off, hard chrome will outlast bare metal. You sacrifice accuracy for longevity.
Stainless steel barrels are well known for higher velocities and better accuracy because the bore has been cut true into the steel. This cut does not leave any added imperfections so the round has less resistance as it travels down the barrel. This quality does come at a high price. Most stainless steel barrels cost almost twice what a chrome lined barrel cost, which prices them out of the market for most shooters. Also, while they have corrosive resistant properties by nature, they are not completely corrosive resistant and can corrode over time. They are the choice for most high end manufacturers and shooters but they are not a viable option for every shooter.
Adams Arms Advantage:
Our barrels are finished with our proprietary QPQ Melonite process inside and out. Unlike hard chrome and magnesium phosphate, Melonite is a molecular bonding process with the metal. It allows the chemicals to seep down below the surface area of the metal, instead of just adding a top layer. This means that the barrel can be cut to a true rifle bore while maintaining complete corrosion resistance and virtually no wear. It also means that the protection offered is not just a thin layer on top of the material but actually penetrates layers deep ensuring that it does not wear off. Now you have the velocities of a stainless steel true rifle bore with complete protection! You can out last a chrome lined barrel and shoot with the accuracy and efficiency of a stainless steel barrel, all without breaking the bank. Check out velocity testing below.
The SBR velocity data especially stands out. The 7.5" PDW AR is a now viable option for personal and professional defense as well as military units that need a short CQB rifle with an effective range well past 100 meters. We have been getting even higher velocities out of our 11.5" and 14.5" barrels, with the 14.5" averaging close to 3000 fps using military ammo. Our 16" barrels are getting velocities very close to a standard 20" chrome lined AR15 barrel!