ALG Ergonomic Modular Rail EMR V3X M-LOK Free Float Handguard AR15 MLOK AR-15
Note: EMR M-LOK rails DO NOT include any M-LOK accessory rails, M-LOK accessory rails must be purchased separately and can be found here on our website. When comparing an ALG total rail weight to a rail that uses a stock barrel nut, make sure to add the weight of the stock barrel nut to the total weight of the non-ALG rail you are comparing for an accurate comparison.
Note: IF THIS IS YOUR FIRST TIME PURCHASING AN ALG DEFENSE RAIL, YOU WILL NEED TO PURCHASE A BARREL NUT WRENCH IN ORDER TO PROPERLY INSTALL THE RAIL.
Like the V2X, the V3X M-LOK support allows the user to mount an array of third party accessories and customize their weapon platform to suit their needs. Magpul M-LOK accessories can be attached along the length of the rail at 2, 4, 6, 8 and 10 o’clock positions.
The EMR V3X M-LOK also features two integrated anti-rotational QD slots at the base of the rail at the 2 and 10 o’clock positions. The primary difference of the EMR V3X is its full-length M1913 picatinny rail at the 12 o’clock position. The machined M1913 section is ideal for attaching front sights, lasers, IR illuminators, lights and any other optic or sling related M1913 compatible accessory.
10" Weight: 9.9oz.
12" Weight: 11.1oz.
13" Weight: 11.7oz.
15" Weight: 12.9oz.
Hardware Weight: 2.42oz.
05-320B, 05-321B, 05-322B, 05-323B
Instead of four sharp and jagged M1913 rails spaced at 90 degree intervals, like a traditional quadrail, the ALG EMR is fully ergonomic, maintaining a comfortable rounded shape throughout the length of the rail. The rounded top allows the shooter to easily wrap his or her thumb over the top of the EMR as many shooters like to do with a forward grip.
2. SET-UP IS MODULAR AND FLEXIBLE
Accessory rails can be attached anywhere along the length at 60° intervals. The V3 provides a machined picatinny rail monolithic top rail at the 12 o’clock position.
3. FREE FLOATING
The weapon barrel is completely free floating when an ALG EMR is mounted. No force is put into the barrel from slings or bipods that could affect point of aim.
The ALG EMR is machined from a 6061-T6 extrusion, made from aircraft grade aluminum.
Current infantry doctrine makes extensive use of accessories that require attachment to a weapon rail. Flashlights, visible and infrared lasers, night vision and thermal sights, all require a rigid weapon rail so that zero is not changed when a bipod or sling is used to support the weapon from the rail. The ALG EMR is a rigid interface for weapon accessories due to its precisely machined proprietary barrel nut and secure rail interface and clamping arrangement.
Use of extruded 6061-T6 aircraft grade aluminum in an ALG EMR give the entire assembly a good strength and performance to weight ratio.
7. ACCESSORY RAILS EASY TO INSTALL
Utilizing the Magpul M-LOK Locking System, the EMR V3 allows not only the direct attchement of accessory rails, but any M-LOK compatible accessory.
8. ACCESSORY RAILS ARE SECURELY ATTACHED
Magpul's M-LOK Locking System is a rock solid platform for attaching a variety of 3rd party M-LOK accessories. The locking system utilizes a standard that allows accessories to attach directly to rail systems using a t-nut and camming method which has proved to be very strong, effective and easy to use.
9. RAIL ASSEMBLY IS EASY TO INSTALL
Each ALG EMR comes with a precision machined, 2” long barrel nut that is machined from aircraft grade 7075-T6 aluminum and hardcoat anodized for a durable surface. The ALG EMR barrel nut is required to be indexed to the gas tube, and includes all of the necessary shim kits and instructions to do so. Then the rail is slid onto the barrel nut with a fit that precisely aligns the rail to the barrel. After indexing the rail to the receiver, six mounting bolts are tightened and the rail is secure.
10. RAIL IS EASY TO REMOVE
Just by removing six screws the ALG EMR can be slid off the barrel nut for cleaning or gas system maintenance. As quick as it is removed the ALG EMR is can be re-installed with the precise barrel nut to rail fit maintaining sight and accessory zero.
MAG581 ALUMINUM 5 SLOT 2.5" RAIL
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 5 Slots, max overall length of 2.5".